The AqMatic AquaMatic V42B-0032-00000 is a 3/4 inch diaphragm valve configured as normally closed with spring assist closed operation, meaning the valve defaults to a closed position and uses spring force to support shutoff when control pressure is removed. This is a functional distinction from standard normally closed valves and is specifically selected in systems where positive shutoff must be maintained under low or fluctuating pressure conditions.
Built on the V42 series diaphragm valve platform, this valve uses a diaphragm to separate the control chamber from the flow stream, allowing actuation through pilot pressure while maintaining efficient flow characteristics. The y-pattern body design provides a large seat opening and high lift disc, enabling higher flow rates with lower pressure loss compared to more restrictive valve geometries.
This configuration uses standard Buna-N diaphragm, seals, and disc materials, along with brass and stainless steel internal components. Unlike special (00SX) valves, this unit has no drilled or tapped bosses and no solenoid configuration, making it a true baseline mechanical configuration within the V42B lineup.
Because of its spring-assisted closure, this valve is commonly used in systems where fail-safe shutoff is required, including filtration systems, backwash cycles, and other applications where maintaining a closed state without continuous control pressure is critical. In automated systems, it is often paired with 48 series stagers and coordinated through stager controllers, but its primary value lies in its mechanical reliability and default closed positioning, not custom control integration.
$223.32
Aquamatic – V42C-0000-00000 – 421 – 1″ – Normally Open
| Part Number | V42C-0000-00000 |
| SKU | 1070011 |
| Model | 421 |
| Pipe Size | 1″ |
| Pipe Connection | Female NPT Threaded |
| Body & Cap Mat’l | Cast Iron – Red Primer |
| Valve Option | Normally Open |
| Seal/Diaphragm/Disk (kit suffix) | Buna / Buna / Buna (RA) |
| Internal Parts | Brass, Stainless Steel |
| Drill & Tap Bosses | None |
| Solenoid Option | None |
| Solenoid Feature | None |
| Approximate Ship Weight (lbs.) | 3.5 |
Normally closed, spring assist closed configuration: Maintains shutoff as the default state and reinforces closure under low pressure conditions.
Standard V42B configuration: No solenoid, no drilled bosses, and no custom modifications, making it a baseline mechanical valve.
Buna-N diaphragm and seals: Provides consistent sealing and diaphragm response for water and general fluid applications.
Brass and stainless steel internal components: Supports durability and long service life in typical operating environments.
3/4 inch female NPT connection: Standard threaded connection for integration into existing piping systems.
Y-pattern valve design: Allows higher flow rates with reduced pressure loss compared to conventional valve geometries.
Serviceable in-line construction: Components can be maintained or replaced without removing the valve from the system.
| Weight | 4.0 lbs |
|---|---|
| Dimensions | 8 × 6 × 4 in |
